This is the binary version of the XACT SoundBank (XSB), version 11, as used by Jade Empire on the original Xbox. The Windows PC version of Jade Empire uses an ASCII variant, which contains the same information.
Conceptually, it's very similar to later XSB versions that are used by Microsoft's XNA toolset.
On the top-level, a SoundBank consists of cues and sounds. A sound is a collection of tracks, which each contain a list of events and a list of wave variations, while a cue consists of a list of references to sounds.
Both the cue variation and the wave variation can be selected using different methods. For example, they could be played in order, or randomly. Or they could be explicitly selected by game.
A structural example
- Sounds
- Sound 0
- Track 0
- Event list
- Wave variations
- Sound 23 out of WaveBank "foobar"
- Sound 24 out of WaveBank "foobar"
- Sound 12 out of WaveBank "quux"
- Sound 1
- Track 0
- Event list
- Wave variations
- Sound 24 out of WaveBank "foobar"
- Track 1
- Event list
- Wave variations
- Sound 25 out of WaveBank "foobar"
- Cues
Structures
All numerical values are little-endian.
| Offset
|
Size
|
Description
|
| 0x00
|
4
|
FourCC, "SDBK"
|
| 0x04
|
2
|
Version, 11 (0B 00)
|
| 0x06
|
2
|
CRC
|
| 0x08
|
4
|
Offset to WaveBank array
|
| 0x0C
|
4
|
Offset to crossfade parameters array
|
| 0x10
|
4
|
Offset to 3D parameters array
|
| 0x14
|
4
|
Offset to ?
|
| 0x18
|
2
|
XSB flags
|
| 0x1A
|
2
|
Number of ?
|
| 0x1C
|
2
|
Number of sounds (soundCount)
|
| 0x1E
|
2
|
Number of cues (cueCount)
|
| 0x20
|
2
|
Number of ?
|
| 0x22
|
2
|
Number of WaveBanks
|
| 0x24
|
4
|
?
|
| 0x28
|
16
|
SoundBank name
|
| 0x38
|
cueCount * 20
|
Cue entries
|
| 0x38 + cueCount * 20
|
soundCount * 20
|
Sound entries
|
WaveBank entry
| Offset
|
Size
|
Description
|
| 0x00
|
16
|
WaveBank file name (without extension)
|
Cue entry
| Offset
|
Size
|
Description
|
| 0x00
|
2
|
Flags
|
| 0x02
|
2
|
Sound index (see below)
|
| 0x04
|
4
|
Offset to name (see below)
|
| 0x08
|
4
|
Offset to cue variations (see below)
|
| 0x0C
|
2
|
Index into the crossfade parameters array
|
| 0x0E
|
2
|
?
|
| 0x10
|
4
|
Interactive transitions (see below)
|
Sound index: 0xFFFF if the cue has only one variations.
Offset to name: 0xFFFFFFFF if the cue has no name. Should be ignored if XSB_FLAG_NO_CUE_NAMES is set.
Offset to cue variations: 0xFFFFFFFF if the cue has no variations
Interactive transitions: AAAAAAAAAAAAAAAAAAAAAAAABBBBB???
- A, 24 bits: Offset to the interactive transition definitions
- B, 5 bits: Trigger variable
Sound entry
| Offset
|
Size
|
Description
|
| 0x00
|
4
|
Offset or indices (see below)
|
| 0x04
|
2
|
Volume and LFE volume (see below)
|
| 0x06
|
2
|
Pitch
|
| 0x08
|
1
|
Number of tracks
|
| 0x09
|
1
|
Layer
|
| 0x0A
|
1
|
Category
|
| 0x0B
|
1
|
Flags
|
| 0x0C
|
2
|
Index into the 3D parameters array
|
| 0x0E
|
1
|
Priority
|
| 0x0F
|
1
|
I3DL2 volume in 2.56th dB
|
| 0x10
|
2
|
Parametric EQ gain in 8192th dB
|
| 0x12
|
2
|
EQ Q and EQ frequency (see below)
|
Offset or indices: Offset to non-trivial entry, or 2 bytes of wave index and 2 bytes of wavebank index.
Volume and LFE volume: AAAAAAABBBBBBBBB
- A, 7 bits: LFE volume. VolumeLFE = -A * 0.5
- B, 9 bits: volume: Volume = -B * 0.16
EQ Q and EQ frequency: AAAAAAAAAAAAABBB
- A, 13 bits: EQ frequency
- B, 3 bits: EQ Q coefficient. Q = 1 / 2^B
Simple sound track
One track, one PLAY event, multiple wave variations.
| Offset
|
Size
|
Description
|
| 0x00
|
4
|
Variation parameters (see below)
|
| 0x04
|
variationCount * 4
|
Variation entry (see below)
|
Variation parameters: AABBBBBBBBBBBBBCCCCDDDDDDDDDDDDD
- A, 2 bits: Flags
- B, 13 bits: Current variation
- C, 4 bits: Variation selection method
- D, 13 bits: Number of variations (variationCount)
Variation entry: 2 bytes of wave index and 2 bytes of wavebank index.
Complex sound tracks
Multiple tracks or more than just a simple PLAY event.
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Number of events
|
| 0x01
|
3
|
Offset to event list
|
Variation table
| Offset
|
Size
|
Description
|
| 0x00
|
4
|
Variation parameters (see below)
|
| 0x04
|
variationCount * 8
|
Variation entry
|
Variation parameters: AABBBBBBBBBBBBBCCCCDDDDDDDDDDDDD
- A, 2 bits: Flags
- B, 13 bits: Current variation
- C, 4 bits: Variation selection method
- D, 13 bits: Number of variations (variationCount)
Event list entry
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Event type
|
| 0x01
|
3
|
Timestamp in milliseconds
|
| 0x04
|
1
|
Parameter size in bytes
|
| 0x05
|
1
|
Flags
|
| 0x06
|
2
|
?
|
| ....
|
|
Parameters
|
Event list entry for a PLAY event
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Event type (= 0x00)
|
| 0x01
|
3
|
Timestamp in milliseconds
|
| 0x04
|
1
|
Parameter size in bytes (= 0x04)
|
| 0x05
|
1
|
Flags
|
| 0x06
|
2
|
Loop count
|
| 0x08
|
4
|
Offset or indices (see below)
|
Offset or indices: If XSB_PLAY_EVENT_FLAG_COMPLEX in Flags is set, this is an offset to a wave variation list (see "Simple sound track" above). Otherwise, this is 2 bytes of a sound index followed by 2 bytes of bank index.
Event list entry for a PLAY_COMPLEX event
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Event type (= 0x01)
|
| 0x01
|
3
|
Timestamp in milliseconds
|
| 0x04
|
1
|
Parameter size in bytes (= 0x10)
|
| 0x05
|
1
|
Flags
|
| 0x06
|
2
|
Loop count
|
| 0x08
|
4
|
Offset or indices (see below)
|
| 0x0C
|
2
|
Pitch variation, lower bound
|
| 0x0E
|
2
|
Pitch variation, upper bound
|
| 0x10
|
2
|
Volume variation, lower bound
|
| 0x12
|
2
|
Volume variation, upper bound
|
| 0x14
|
2
|
Maximum variable sound delay in milliseconds
|
| 0x16
|
2
|
?
|
Offset or indices: If XSB_PLAY_EVENT_FLAG_COMPLEX in Flags is set, this is an offset to a wave variation list (see "Simple sound track" above). Otherwise, this is 2 bytes of a sound index followed by 2 bytes of bank index.
Event list entry for a PITCH event
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Event type (= 0x04)
|
| 0x01
|
3
|
Timestamp in milliseconds
|
| 0x04
|
1
|
Parameter size in bytes (= 0x08)
|
| 0x05
|
1
|
Flags
|
| 0x06
|
2
|
Number of fade steps
|
| 0x08
|
2
|
Pitch, lower bound or starting value
|
| 0x0A
|
2
|
Pitch, upper bound or starting value
|
| 0x0C
|
1
|
?
|
| 0x0D
|
3
|
Fade duration in milliseconds
|
Event list entry for a VOLUME event
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Event type (= 0x05)
|
| 0x01
|
3
|
Timestamp in milliseconds
|
| 0x04
|
1
|
Parameter size in bytes (= 0x08)
|
| 0x05
|
1
|
Flags
|
| 0x06
|
2
|
Number of fade steps
|
| 0x08
|
2
|
Volume, lower bound or starting value
|
| 0x0A
|
2
|
Volume, upper bound or starting value
|
| 0x0C
|
1
|
?
|
| 0x0D
|
3
|
Fade duration in milliseconds
|
Event list entry for a LOWPASS event
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Event type (= 0x07)
|
| 0x01
|
3
|
Timestamp in milliseconds
|
| 0x04
|
1
|
Parameter size in bytes (= 0x0C)
|
| 0x05
|
1
|
Flags
|
| 0x06
|
2
|
Sweep step count
|
| 0x08
|
2
|
Cut-off frequency start
|
| 0x0A
|
2
|
Cut-off frequency end
|
| 0x0C
|
1
|
?
|
| 0x0D
|
3
|
Sweep duration
|
| 0x10
|
2
|
Resonance start
|
| 0x12
|
2
|
Resonance end
|
Event list entry for a LFO_PITCH event
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Event type (= 0x08)
|
| 0x01
|
3
|
Timestamp in milliseconds
|
| 0x04
|
1
|
Parameter size in bytes (= 0x04)
|
| 0x05
|
1
|
Flags
|
| 0x06
|
2
|
?
|
| 0x08
|
1
|
?
|
| 0x09
|
1
|
?
|
| 0x0A
|
1
|
Delta
|
| 0x0B
|
1
|
Pitch modulation
|
Event list entry for a LFO_MULTI event
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Event type (= 0x09)
|
| 0x01
|
3
|
Timestamp in milliseconds
|
| 0x04
|
1
|
Parameter size in bytes (= 0x08)
|
| 0x05
|
1
|
Flags
|
| 0x06
|
2
|
?
|
| 0x08
|
1
|
?
|
| 0x09
|
1
|
?
|
| 0x0A
|
1
|
Delta
|
| 0x0B
|
1
|
Pitch modulation
|
| 0x0C
|
1
|
Filter modulation
|
| 0x0D
|
1
|
Amplitude modulation
|
| 0x0E
|
1
|
?
|
| 0x0F
|
1
|
?
|
Event list entry for a ENVELOPE_AMPLITUDE event
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Event type (= 0x0A)
|
| 0x01
|
3
|
Timestamp in milliseconds
|
| 0x04
|
1
|
Parameter size in bytes (= 0x0C)
|
| 0x05
|
1
|
Flags
|
| 0x06
|
2
|
?
|
| 0x08
|
2
|
Delay in seconds
|
| 0x0A
|
2
|
Attack in seconds
|
| 0x0C
|
2
|
Hold in seconds
|
| 0x0E
|
2
|
Decay in seconds
|
| 0x10
|
2
|
Release in seconds
|
| 0x12
|
1
|
Sustain power
|
| 0x13
|
1
|
?
|
Event list entry for a ENVELOPE_PITCH event
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Event type (= 0x0B)
|
| 0x01
|
3
|
Timestamp in milliseconds
|
| 0x04
|
1
|
Parameter size in bytes (= 0x10)
|
| 0x05
|
1
|
Flags
|
| 0x06
|
2
|
?
|
| 0x08
|
2
|
Delay in seconds
|
| 0x0A
|
2
|
Attack in seconds
|
| 0x0C
|
2
|
Hold in seconds
|
| 0x0E
|
2
|
Decay in seconds
|
| 0x10
|
2
|
Release in seconds
|
| 0x12
|
1
|
Sustain power
|
| 0x13
|
1
|
?
|
| 0x14
|
1
|
?
|
| 0x15
|
1
|
?
|
| 0x16
|
1
|
Pitch scale
|
| 0x17
|
1
|
Filter cut-off
|
Event list entry for a LOOP event
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Event type (= 0x0C)
|
| 0x01
|
3
|
Timestamp in milliseconds
|
| 0x04
|
1
|
Parameter size in bytes (= 0x00)
|
| 0x05
|
1
|
Flags
|
| 0x06
|
2
|
Number of loops (see below)
|
Number of loops: 0xFFFF for looping indefinitely.
Event list entry for a MARKER event
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Event type (= 0x0E)
|
| 0x01
|
3
|
Timestamp in milliseconds
|
| 0x04
|
1
|
Parameter size in bytes (= 0x00)
|
| 0x05
|
1
|
Flags
|
| 0x06
|
2
|
Marker occurrences
|
| 0x08
|
4
|
Marker value
|
| 0x0C
|
1
|
?
|
| 0x0D
|
3
|
Repeat duration in milliseconds
|
Event list entry for a MIXBINS event
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Event type (= 0x10)
|
| 0x01
|
3
|
Timestamp in milliseconds
|
| 0x04
|
1
|
Parameter size in bytes (= 0x20)
|
| 0x05
|
1
|
Flags
|
| 0x06
|
2
|
?
|
| 0x08
|
1
|
Channel index 0
|
| 0x09
|
1
|
?
|
| 0x0A
|
2
|
Channel volume 0
|
| 0x0C
|
1
|
Channel index 1
|
| 0x0D
|
1
|
?
|
| 0x0E
|
2
|
Channel volume 1
|
| 0x10
|
1
|
Channel index 2
|
| 0x11
|
1
|
?
|
| 0x12
|
2
|
Channel volume 2
|
| 0x14
|
1
|
Channel index 3
|
| 0x15
|
1
|
?
|
| 0x16
|
2
|
Channel volume 3
|
| 0x18
|
1
|
Channel index 4
|
| 0x19
|
1
|
?
|
| 0x1A
|
2
|
Channel volume 4
|
| 0x1C
|
1
|
Channel index 5
|
| 0x1D
|
1
|
?
|
| 0x1E
|
2
|
Channel volume 5
|
| 0x20
|
1
|
Channel index 6
|
| 0x21
|
1
|
?
|
| 0x22
|
2
|
Channel volume 6
|
| 0x24
|
1
|
Channel index 7
|
| 0x25
|
1
|
?
|
| 0x26
|
2
|
Channel volume 7
|
Event list entry for an ENVIRONMENT_REVERB event
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Event type (= 0x11)
|
| 0x01
|
3
|
Timestamp in milliseconds
|
| 0x04
|
1
|
Parameter size in bytes (= 0x30)
|
| 0x05
|
1
|
Flags
|
| 0x06
|
2
|
?
|
| 0x08
|
4
|
Room effect attenuation
|
| 0x0C
|
4
|
High-frequency room effect attenuation
|
| 0x10
|
4
|
Roll-off factor for the room effect
|
| 0x14
|
4
|
Decay time
|
| 0x18
|
4
|
High-frequency to low-frequency decay time ratio
|
| 0x1C
|
4
|
(Early) Reflection attenuation
|
| 0x20
|
4
|
(Early) Reflection delay
|
| 0x24
|
4
|
(Late) Reverb attenuation
|
| 0x28
|
4
|
(Late) Reverb delay
|
| 0x2C
|
4
|
Diffusion, echo density in (late) reverb decay
|
| 0x30
|
4
|
Density, modal density in (late) reverb decay
|
| 0x34
|
4
|
Reference high frequency
|
Event list entry for a MIXBINSPAN event
| Offset
|
Size
|
Description
|
| 0x00
|
1
|
Event type (= 0x10)
|
| 0x01
|
3
|
Timestamp in milliseconds
|
| 0x04
|
1
|
Parameter size in bytes (= 0x14)
|
| 0x05
|
1
|
Flags
|
| 0x06
|
2
|
?
|
| 0x08
|
1
|
Speaker configuration (see below)
|
| 0x09
|
3
|
Angle and flag (see below)
|
| 0x0C
|
1
|
Channel index 0
|
| 0x0D
|
1
|
?
|
| 0x0E
|
2
|
Channel volume 0
|
| 0x10
|
1
|
Channel index 1
|
| 0x11
|
1
|
?
|
| 0x12
|
2
|
Channel volume 1
|
| 0x14
|
1
|
Channel index 2
|
| 0x15
|
1
|
?
|
| 0x16
|
2
|
Channel volume 2
|
| 0x18
|
1
|
Channel index 3
|
| 0x19
|
1
|
?
|
| 0x1A
|
2
|
Channel volume 3
|
Speaker configuration: 0 for 5 channels, 1 for 4 channels
Angle and flags: 00000ABBBBBBBBBCCCCCCCCC
- A, 1 bit: If set, use 3D mix bins
- B, 9 bits: end angle
- C, 9 bits: start angle
Variation entry
| Offset
|
Size
|
Description
|
| 0x00
|
2
|
Sound index
|
| 0x02
|
2
|
?
|
| 0x04
|
2
|
Weight minimum
|
| 0x06
|
2
|
Weight maximum
|
3D parameters entry
| Offset
|
Size
|
Description
|
| 0x00
|
2
|
Inside cone angle
|
| 0x02
|
2
|
Outside cone angle
|
| 0x04
|
2
|
Cone outside volume
|
| 0x06
|
2
|
?
|
| 0x08
|
4
|
Minimum distance
|
| 0x0C
|
4
|
Maximum distance
|
| 0x10
|
4
|
Distance factor
|
| 0x14
|
4
|
Rolloff factor
|
| 0x18
|
4
|
Doppler factor
|
| 0x1C
|
1
|
Mode
|
| 0x1D
|
4
|
?
|
| 0x20
|
4
|
?
|
| 0x24
|
4
|
?
|
Crossfade parameters entry
| Offset
|
Size
|
Description
|
| 0x00
|
4
|
Fade-in time in 10^-7 seconds
|
| 0x04
|
2
|
Initial volume
|
| 0x06
|
1
|
Type (see below)
|
| 0x07
|
1
|
Fade-in step count
|
| 0x08
|
4
|
Fade-out time in 10^-7 seconds
|
| 0x0C
|
2
|
Final volume
|
| 0x0E
|
1
|
Type (see below)
|
| 0x0F
|
1
|
Fade-out step count
|
Type: AAAA????
- A, 4 bits: 0 for disabled, 1 for linear, 2 for logarithmic
Interactive transitions array
| Offset
|
Size
|
Description
|
| 0x00
|
4
|
Number of transitions (transitionCount)
|
| 0x04
|
transitionCount * 24
|
Transition entry
|
In general, there's one transition per sound combination (excluding the cases where to and from are the same), plus one set for silence to each sound, plus one set for each sound to silence.
I.e. for N sounds, there's N^2 - N + 2N, or N^2 + N in shorter, transitions.
The order is as follows:
- Silence -> N_0
- Silence -> N_1
- Silence -> N_2
- ...
- N_0 -> Silence
- N_0 -> N_1
- N_0 -> N_2
- ...
- N_1 -> Silence
- N_1 -> N_0
- N_1 -> N_2
- ...
Interactive transition entry
| Offset
|
Size
|
Description
|
| 0x00
|
2
|
Flags (see below)
|
| 0x02
|
2
|
Transitional sound index
|
| 0x04
|
2
|
Source fade-out duration in milliseconds
|
| 0x06
|
2
|
Destination fade-in duration in milliseconds
|
| 0x08
|
4
|
Source marker, low
|
| 0x0C
|
4
|
Source marker, high
|
| 0x10
|
4
|
Destination marker, low
|
| 0x14
|
4
|
Destination marker, high
|
Flags: 00000AAAABBBCCCC
- A, 4 bits: Transition source
- B, 3 bits: Transition effect
- C, 4 bits: Transition destination
Flags
XSB flags
| Name
|
Value
|
Description
|
| XSB_FLAG_NO_CUE_NAMES
|
0x0001
|
If set, cues in the XSB file have no human-readable name
|
Cue flags
| Name
|
Value
|
Description
|
| XSB_CUE_FLAG_SEQUENTIAL
|
0x0001
|
If set, cue for sequential playback
|
| XSB_CUE_FLAG_CROSSFADE
|
0x0002
|
If set, enable crossfade
|
| XSB_CUE_FLAG_STOPONSTARVE
|
0x0004
|
If set, stop on starvation
|
| XSB_CUE_FLAG_INTERACTIVE
|
0x0008
|
If set, the cue is interactive
|
Sound flags
| Name
|
Value
|
Description
|
| XSB_SOUND_FLAG_3D
|
0x01
|
If set, the sound has 3D parameters
|
| XSB_SOUND_FLAG_GAINBOOST
|
0x02
|
If set, the sound has a gain boost of 6dB applied
|
| XSB_SOUND_FLAG_EQ
|
0x04
|
If set, the sound has parametric EQ enabled
|
| XSB_SOUND_FLAG_TRIVIAL
|
0x08
|
Trivial sound: one track, one PLAY event, one wave variation
|
| XSB_SOUND_FLAG_SIMPLE
|
0x10
|
Simple sound: one track, one PLAY event, multiple wave variations
|
| XSB_SOUND_FLAG_LINGER
|
0x20
|
If set, the sound should linger in an interactive cue
|
PLAY event flags
| Name
|
Value
|
Description
|
| XSB_PLAY_EVENT_FLAG_COMPLEX
|
0x04
|
Complex wave variations definition
|
| XSB_PLAY_EVENT_FLAG_LOOPVARIATION
|
0x40
|
Select new wave variation on each loop
|
PITCH event flags
| Name
|
Value
|
Description
|
| XSB_PITCH_EVENT_FLAG_VARIATION
|
0x04
|
Enable variation
|
| XSB_PITCH_EVENT_FLAG_RELATIVE
|
0x10
|
Use relative values
|
| XSB_PITCH_EVENT_FLAG_FADE
|
0x20
|
Enable fade
|
VOLUME event flags
| Name
|
Value
|
Description
|
| XSB_VOLUME_EVENT_FLAG_VARIATION
|
0x04
|
Enable variation
|
| XSB_VOLUME_EVENT_FLAG_RELATIVE
|
0x10
|
Use relative values
|
| XSB_VOLUME_EVENT_FLAG_FADE
|
0x20
|
Enable fade
|
LOWPASS event flags
| Name
|
Value
|
Description
|
| XSB_LOWPASS_EVENT_FLAG_RANDOM
|
0x04
|
Random values
|
| XSB_LOWPASS_EVENT_FLAG_RELATIVE
|
0x10
|
Use relative values
|
| XSB_LOWPASS_EVENT_FLAG_SWEEP
|
0x20
|
Sweep cut-off frequencies
|
MARKER event flags
| Name
|
Value
|
Description
|
| XSB_MARKER_EVENT_FLAG_REPEAT
|
0x20
|
Repeat marker
|
Enums
Event types
| Name
|
Value
|
Description
|
| XSB_EVENT_TYPE_PLAY
|
0x00
|
Play a wave, from start to finish
|
| XSB_EVENT_TYPE_PLAY_COMPLEX
|
0x01
|
Play a wave, with parameters
|
| XSB_EVENT_TYPE_STOP
|
0x03
|
Stop playing
|
| XSB_EVENT_TYPE_PITCH
|
0x04
|
Set the pitch
|
| XSB_EVENT_TYPE_VOLUME
|
0x05
|
Set the volume
|
| XSB_EVENT_TYPE_LOWPASS
|
0x07
|
Low-pass filter
|
| XSB_EVENT_TYPE_LFO_PITCH
|
0x08
|
Low-frequency oscillator on the pitch
|
| XSB_EVENT_TYPE_LFO_MULTI
|
0x09
|
Low-frequency oscillator on the pitch and amplitude
|
| XSB_EVENT_TYPE_ENVELOPE_AMPLITUDE
|
0x0A
|
DAHDSR envelope on the amplitude
|
| XSB_EVENT_TYPE_ENVELOPE_PITCH
|
0x0B
|
DAHDSR envelope on the pitch
|
| XSB_EVENT_TYPE_LOOP
|
0x0C
|
Loop a wave
|
| XSB_EVENT_TYPE_MARKER
|
0x0E
|
Marker
|
| XSB_EVENT_TYPE_DISABLED
|
0x0F
|
A disabled event
|
| XSB_EVENT_TYPE_MIXBINS
|
0x10
|
Set a separate volume for each channel
|
| XSB_EVENT_TYPE_ENVIRONMENT_REVERB
|
0x11
|
Environmental reverb
|
| XSB_EVENT_TYPE_MIXBINSPAN
|
0x12
|
Set channel volumes according to a listener orientation
|
Variation selection methods
| Name
|
Value
|
Description
|
| XSB_VARIATION_SELECT_RANDOM_NOREPEATS
|
0x00
|
Random, but no immediate repeats
|
| XSB_VARIATION_SELECT_ORDERED
|
0x01
|
One after the other, in order
|
| XSB_VARIATION_SELECT_SHUFFLE
|
0x02
|
Random, no repeats at all
|
| XSB_VARIATION_SELECT_PARAMETER
|
0x03
|
Game-controlled
|
| XSB_VARIATION_SELECT_RANDOM
|
0x04
|
Completely random
|
| XSB_VARIATION_SELECT_ORDERED_FROMRANDOM
|
0x05
|
Start with a random entry, then in order
|
Transition source
| Name
|
Value
|
Description
|
| XSB_TRANSITION_SOURCE_IMMEDIATE
|
0x00
|
Immediately
|
| XSB_TRANSITION_SOURCE_MARKER
|
0x01
|
From a marker with a given range
|
| XSB_TRANSITION_SOURCE_RANDOM_MARKER
|
0x02
|
From a random marker within a given range
|
| XSB_TRANSITION_SOURCE_END_LOOP
|
0x04
|
End of loop
|
| XSB_TRANSITION_SOURCE_END_SOUND
|
0x08
|
End of sound
|
Transition destination
| Name
|
Value
|
Description
|
| XSB_TRANSITION_DESTINATION_BEGINNING
|
0x00
|
To the beginning
|
| XSB_TRANSITION_DESTINATION_ALIGNED_TIME
|
0x01
|
To the same time
|
| XSB_TRANSITION_DESTINATION_ALIGNED_MARKER
|
0x02
|
To the same marker
|
| XSB_TRANSITION_DESTINATION_MARKER
|
0x04
|
To a marker with a given range
|
| XSB_TRANSITION_DESTINATION_RANDOM_MARKER
|
0x08
|
To a random marker within a given range
|
Transition effect
| Name
|
Value
|
Description
|
| XSB_TRANSITION_EFFECT_NONE
|
0x00
|
No effect
|
| XSB_TRANSITION_EFFECT_CROSSFADE
|
0x01
|
Crossfade
|
| XSB_TRANSITION_EFFECT_SOUND
|
0x02
|
Use a transitional sound
|
| XSB_TRANSITION_EFFECT_SOUND_FADE_TO
|
0x03
|
Fade into a transitional sound
|
| XSB_TRANSITION_EFFECT_SOUND_FADE_FROM
|
0x06
|
Fade from a transitional sound
|
| XSB_TRANSITION_EFFECT_SOUND_FADE_TOFROM
|
0x07
|
Fade into and from a transitional sound
|